Simultaneous Determination of 1-Methyltryptophan and Indoleamine 2,3-Dioxygenase Biomakers of Tryptophan and Kynurenine in Mice Tumors by HPLC–MS/MS

Indoleamine 2,3-dioxygenase (IDO), an immune checkpoint protein, can cause the depletion of tryptophan (Trp) and accumulation of its metabolite of kynurenine (Kyn) in cancer cells, and generates the immunosuppressive microenvironment that supports tumor cell growth. A novel immunoregulatory prodrug micelle based on polyethylene glycol-derivatized an IDO-selective inhibitor of 1-methyltryptophan (1-MT), PEG-Fmoc-1-MT, was developed for inhibiting the IDO activity of the conversion of Trp to Kyn in tumor microenvironments. To investigate the 1-MT distribution and Trp/Kyn ratios in mice tumors with PEG-Fmoc-1-MT prodrug micelles treatment, a HPLC–MS/MS method for simultaneous determination of 1-MT and IDO biomakers of Trp and Kyn in mouse tumors was developed and validated. Triple-quadrupole mass spectrometry with positive electrospray ionization as source ionization in multiple reaction monitoring at m/z 219.0?→?160.1, 205.0?→?118.2, 209.0?→?146.1 and 249.3?→?148.3 was used for determination of 1-MT, Trp, Kyn and matrine (internal standard). The method demonstrated good linearity at the concentrations ranging from 10 to 10,000 ng/mL and lower limits of quantitation of 1 ng/mL for 1-MT, Trp and Kyn, respectively. The validated method was successfully applied to 1-MT tumor biodistribution and Trp/Kyn ratio studies in 4T1 tumor bearing mice i.v. with PEG-Fmoc-1-MT prodrug micelles. The mice tumors with PEG-Fmoc-1-MT prodrug micelles treatment exhibited higher 1-MT accumulation and lower Trp/Kyn ratio, in comparison with those of mice with 1-MT solution treatment. The developed PEG-Fmoc-1-MT prodrug micelles could be a promising IDO immunoregulatory prodrug micelles for cancer immunotherapy.

     

肿瘤乏氧靶向响应的罗丹明荧光探针及其成像介导手术治疗

基于罗丹明的良好荧光性能, 经化学偶联反应制备并表征了一个偶氮乏氧特异响应的“Off-On”型荧光成像探针(FY-4). 从分子层面证实了其荧光“Off-On”性能和响应机制; 在L02正常细胞及4T1, HeLa和A549肿瘤细胞层面考察了其对受试细胞株的毒性和不同乏氧时间的荧光成像性能; 再利用4T1肿瘤模型, 分别以肿瘤原位注射和尾静脉注射的方式考察了其荧光成像性能, 并探究了其荧光成像介导切除肿瘤性能, 最后还考察了FY-4的生物安全性. 结果表明, FY-4有高的肿瘤乏氧靶向特异“关-开”响应的荧光成像差异显影及荧光成像介导切除肿瘤的潜能, 结合其良好的光物理性能、 生物安全性和明晰的给药时间等特性, 有望为生物医学荧光成像介导肿瘤切除提供新的研究工具.     

酰胺连接的共价有机骨架的制备及其在水中高效光催化性能

光催化是将太阳能转换为化学能的绿色可持续发展途径,有望解决日益严重的能源危机和环境污染问题.在光催化过程中,半导体材料作为光催化剂,负责可见光的捕获、光生载流子的生成和传输以及氧化还原反应,在整个光催化系统中起着决定性的作用.共价有机骨架材料(COFs)是一类新兴的半导体光催化剂,已被证明在可见光诱导的水分解、二氧化碳还原、有机转化反应和水中污染物降解方面具有应用前景.然而,大部分COFs是通过可逆反应构筑的,在水中及苛刻条件下的稳定性差.因此,提升基于COFs的光催化剂在水相中的光催化活性和循环稳定性仍然面临巨大挑战.本文提出了一种新策略,即通过实现多重协同效应,设计和开发2D-COFs作为在水中的高效非均相光催化剂.通过后合成策略将亚胺键连接的2D-COFs氧化,制备了两种具有丰富三嗪结构单元的以酰胺键连接的2D-COFs(命名为COF-JLU18和COF-JLU19).结果表明,COF-JLU18和COF-JLU19具有高比表面积和孔体积,其比表面积分别为1156和541 m2/g;COF-JLU19具有比相似拓扑结构的亚胺COF-JLU17更好的水蒸气吸附性能.此外,COF-JLU19表现出了极高的化学稳定性,在水中、盐酸和氢氧化钠溶液中浸泡两天,其结构和结晶性均没有发生明显变化.由此可见,酰胺键不仅可以增加材料骨架的亲水性,还能够提高COFs对水的稳定性.本文制备的酰胺键连接的COF-JLU19材料,在光降解罗丹明B水溶液(RhB)反应中可以获得高达0.69 min?1的光降解速率常数,活性明显优于其他光催化剂,如C3N4等.COF-JLU19具有较好的催化活性主要归因于以下两方面:一方面,良好的亲水性和固有孔隙率之间的协同效应可以增强COFs在水中对染料的吸附能力,使其光催化活性得到有效提升;另一方面,高的结晶度和优秀的稳定性使酰胺键连接的COFs在多相光催化中实现稳定循环利用.为了扩展COFs的应用前景,本文还制备了一种基于酰胺键连接COFs的静电纺丝膜,在以太阳光为光源的光降解罗丹明B水溶液实验中表现出较高的光催化活性和重复使用性.综上,本文提出的多重协同效应为基于COFs的高效光催化剂的设计提供了一种有效策略.     

Syntheses and crystal structures of new mononuclear and binuclear ruthenium complexes supported by salicylaldimine ligands

Treatment of Ru₃(CO)₁₂ with salicylaldimines [2-HOC₆H₄-CH?=N–C₆H₄-4-R] [R?=?Me; Cl; Br; OMe; CF₃] in refluxing toluene gave three novel binuclear ruthenium carbonyl complexes {[µ-?²-2-OC₆H₄-CH=N-C₆H₄-4-R)][µ-?²-2-CH₂-OC₆H₄][µ-?-NH-C₆H₄-4-R]}Ru₂(CO)₄ [R?=?Me (1), Cl (2), Br (3)] and three mononuclear carbonyl complexes [2-OC₆H₄-CH=N-C₆H₄-4-R][2-OC₆H₄-CH₂NH-C₆H₄-4-R]Ru(CO)₂ [R?=?Me (4), OMe (5), CF₃ (6)], respectively. The structures of 1–6 were fully characterized using IR and NMR spectroscopy, elemental analysis and single-crystal X-ray diffraction. These results suggest that the substituent group on the phenyl of salicylaldimine has a significant effect on the structure of the Ru complex.

     

多元杂环萘二酰亚胺衍生物的合成及其场效应性能研究

杂环修饰的萘二酰亚胺(NDI)类化合物由于其独特的光电性能被研究人员广泛关注,并应用于有机场效应晶体管(OFETs)、有机太阳能电池中(OSCs)、传感器等领域。但是含有给受体单元的多元杂环萘二酰亚胺衍生物的合成并不容易,本文通过简单高效的方法设计合成了含有氮、硫原子的11个杂环类萘二酰亚胺衍生物,并通过紫外可见吸收光谱、循环伏安曲线和X射线衍射对其进行了物性研究。通过溶液旋涂法,制备了该材料的底栅底接触场效应晶体管器件,在空气中表现出p型半导体性能,当退火温度为140 ℃时性能达到最优,其空穴迁移率为0.2 cm_²?V_^-1?s_^-1。     

多金属氧酸盐材料在二氧化碳电催化还原领域中的研究进展

随着工业发展和全球人口的持续增长,人类对化石燃料的消耗日益增加,从而导致大气中二氧化碳含量的显著增加以及与之相伴的一系列环境问题.电化学还原二氧化碳制备高附加值的燃料和化学品具有稳定的效率和较高的经济可行性等特点,目前已成为一种有前景的策略来缓解当前全球面临的能源短缺和气候变暖问题.然而,电催化二氧化碳还原过程存在反应能垒高和复杂的多电子/质子耦合过程等不足,因此,合理有效的电催化剂设计成为该领域的关键问题.近年,理解和明确电化学二氧化碳还原反应过程的活性起源、选择性调控机制和催化反应机理已成为高效电催化剂设计过程中的重要指导原则.作为一类独特的纳米尺度的金属氧簇,多金属氧酸盐(多酸)已成为二氧化碳还原领域的热点材料.尤其是,多酸明确的结构、优越的电子/质子存储转移能力和二氧化碳吸附活化能力有助于探究二氧化碳还原反应过程中的活性起源和构效机制.因此,利用多酸阐明电化学二氧化碳还原反应中的这些关键问题对于开发高效、可实用化的电催化剂意义重大.本文综述了近年多酸在电催化二氧化碳还原反应中取得的进展,重点介绍了多酸阴离子均相分子催化剂、多酸基无机-有机杂化材料催化剂、多酸电解质溶液、多酸-纳米复合材料在电催化二氧化碳还原反应中的应用.利用密度泛函理论结合原位实验证据推测了可能的反应机理,探讨了多酸对电催化活性和产物选择性的影响,揭示了电子/质子存储-转移过程和多酸表面修饰工程在电催化二氧化碳还原过程中的重要作用.最后,本文还分析了多酸基材料存在的问题与面临的挑战,并对多酸基材料在二氧化碳还原领域的未来发展进行了展望,这对理解电催化二氧化碳还原反应中的关键步骤和开发新型高效的电催化二氧化碳还原电催化剂具有启发意义.     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

Thiophene and naphthalene-based double helix: Synthesis,structures and chirality

Both racemate and enantiomer of a novel double helix,binaphthylcyclooctaterthiophene(BN-COTh),which is a DNA-like molecule constructed by two single helices intertwined with each other via covalent bonds,have been synthesized with two building blocks,cycloocta-tetrathiophene(COTh) and cyclooctadinaphthyldithiophene(CONT) fused together via Negishi coupling reaction.Another homologue,dinaphthylcyclooctaterthiophene(DN-COTh) has been employed together as a model compound.Besides the synthetic work,BN-COTh and DN-COTh have been investigated by studying their crystal structures,spectroscopic behaviors,chiral resolution and chiral characteristics,including circular dichroism(CD) spectra and optical rotations.In addition,the novel crystal of enantiomer of(R,R,R)-BN-COTh has been explored.The enantiomer molecules packing along b-axis to form a larger and extended assembly packing due to intermolecular interactions between the enantiomer molecules and chloroform molecules in crystal.     

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C₃N₄ have been widely used in the fields of photocatalytic hydrogen production,photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance.It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation,water oxidation,carbon dioxide reduction and degradation of organic pollutants.Because of the abundant carbon and nitrogen composition of the earth,large-scale production and industrial applications of this material are possible.The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality.These outstanding works have become important materials and milestones on the road to mankind's photocatalytic hydrogen production.This review will begin with the basic idea of designing,synthesizing and improving g-C₃N₄ based photocatalytic materials,and introduce the latest development of g-C₃N₄ photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio,morphology,element doping and heterojunction structure of g-C₃N₄ materials.     

Contradictory effect of gold nanoparticle-decorated molybdenum sulfide nanocomposites on amyloid-β-40 aggregation

The effect of gold nanoparticle-decorated molybdenum sulfide (AuNP-MoS₂) nanocomposites on amyloid-β-40 (Aβ₄₀) aggregation was investigated. The interesting discovery was that the effect of AuNP-MoS₂ nanocomposites on Aβ₄₀ aggregation was contradictory. Low concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides and accelerate Aβ₄₀ fibrils aggregation. However, although high concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides, it eventually inhibited Aβ₄₀ aggregation process. It might be attributed to the interaction between AuNP-MoS₂ nanocomposites and Aβ₄₀ peptides. For low concentration of AuNP-MoS₂ nanocomposites, it was acted as nuclei, resulting in the acceleration of the nucleation process. However, the structural flexibility of Aβ₄₀ peptides was limited as the concentration of AuNP-MoS₂ nanocomposites was increased, resulting in the inhibition of Aβ₄₀ aggregation. These findings suggested that AuNP-MoS₂ nanocomposites might have a great potential to design new multifunctional material for future treatment of amyloid-related diseases.